Card box – Zombicide – Black Plague by giliam8
Card box for all the cards in Zombicide Black Plague. Four slots that each hold at least 54 sleeved cards. Don’t you hate it when you remove the shrink wrap from the cards, and the cards don’t fit any more in the original box (bit exaggerated), let alone when you want to sleeve them?
The lid has a tight fit so it won’t come off so easy, but to keep it firmly in place I use magnets in the tray and the lid. See post-printing.
I used black PLA for the box and the lid. When the print was finished I used sanding paper to give the logo a nice grey look that stands out from the black background.
If you want to make sure the lid won’t come off during transportation; the lid is attached to the box by small magnets. The holes are already in the print.
Box: cylindrical magnets with a diameter of 3mm and a length of 3mm.
Lid: square magnets of 3x3mm. Height 1mm.
Make sure the magnet fits by removing excess plastic, a drop of super glue and ready. (Mind the polarity).
This is a 3D Printed item and is printed in PLA
Card box – Zombicide – Black Plague by giliam8 is licensed under the Creative Commons – Attribution license.